3D Print Cost Calculator
Enter the filament used and the print time. See what the print really costs once power, printer wear, your time and failed prints are counted, and what to charge for it.
How it works
Filament is only part of what a print costs. The printer uses electricity for the whole print, its nozzle, belts and bed wear out a little every hour, and your own time setting up and cleaning the part has a value. Some prints fail, so the cost of those is spread across the good ones. Your slicer shows the grams of filament and the print time before you start. Add a markup on top to get a selling price. To see what the electricity alone costs for any device, use the 3D Energy Bill Calculator by VisionVix.
Frequently asked questions
How do I work out the cost of a 3D print?
Add the filament cost, the electricity, an amount for printer wear and your own time, then allow for failed prints. A 120 g, 6.5 hour print comes to roughly $11 with typical numbers.
How much does the filament cost for one print?
Grams used ÷ 1,000 × the price per kilogram. A 120 g print from a $22 spool uses $2.64 of filament.
How much electricity does a 3D printer use?
A typical desktop printer averages 100 to 150 watts. A 6.5 hour print at 120 W uses 0.78 kWh, about 12 cents at $0.16 per kWh.
How much should I charge for a 3D print?
Work out your full cost first, then add a markup. Many sellers add 30% to 100% depending on the part and how much finishing it needs.
Built by Julian Neagu for VisionVix Apps. Last reviewed 20 November 2026.