3D Pool Volume Calculator
Choose the shape of your pool and type its size and depths. See how much water it holds in gallons and litres, how heavy that water is and how long it takes to fill.
How it works
Pool volume is the surface area multiplied by the average depth. For a pool with a shallow and a deep end, add the two depths and halve the total. A rectangle uses length × width, a round pool uses π × radius², and an oval uses π × length × width ÷ 4. One cubic foot holds 7.48 US gallons and one cubic metre holds 1,000 litres. Pools with steps, benches or a curved floor hold a little less than the estimate. For tanks and aquariums with a set fill level, use the 3D Tank Size Calculator by VisionVix.
Frequently asked questions
How do I calculate the gallons in my pool?
Multiply length × width × average depth in feet, then multiply by 7.48. A 32 × 16 ft pool that averages 5.75 ft deep holds about 22,000 gallons.
How do I find the average depth?
Add the depth of the shallow end to the depth of the deep end and divide by two.
How long does it take to fill a pool?
Divide the volume by the flow of your hose. A garden hose gives roughly 9 gallons a minute, so a 22,000 gallon pool takes about 41 hours.
Why do I need to know my pool volume?
Chemical doses, heater sizing and pump run times are all based on the amount of water in the pool.
Built by Julian Neagu for VisionVix Apps. Last reviewed 20 November 2026.